North Huron to sever 92 acres of land at Richard W. LeVan Airport

By Cory Bilyea, Local Journalism Initiative Reporter, Wingham Advance Times (Photo: J.S. Bond)

The Richard W. LeVan Airport will be severed from the surrounding land in a move to reduce surplus property owned by the township.

A report prepared by Jamie McCarthy, North Huron’s director of public works, outlined the airport operations and plans for the severance.

Staff was directed by council to sever 77 acres of airport property along with an additional 15-acre parcel, a combined total of 92 acres, and obtain an appraisal for the severed lands.

They were then directed to proceed with the disposal of the 92 acres through direct advertising and with the assistance of a professional agency.

The airport includes a total of 448.88 acres of property comprised of: 77.81 acres for Airport Operations, 234.49 acres of agricultural lands (rented out annually), and 136.58 acres of woodlot.

The report said that airport use is limited. In 2020, the facility had five recorded aircraft visits excluding APEX Helicopter activity. It was acknowledged that this low activity is partially due to the COVID-19 pandemic.

Over the last three years, the average number of aircraft visits to the airport is 20. The facility also had an estimated additional 2,600 movements per year by the Air Cadet Gliders Program.

North Huron staff consulted with Explorer Solutions to determine an appropriate area of land to sever to ensure airport operations at the airport were not compromised.

Explorer Solution’s recommendation to staff was to ensure the severed aviation lands comply with Transport Canada’s TP-312 5th Edition rules and regulations.

They also recommended the severed lands allow for the development and certification of non-precision approaches. More specifically, they recommended the proposed boundaries of the severed lands allow for a 75-metre clearance on each side of the runway center line and a minimum of 60-metre from the runway threshold of each runway.

They also recommended approximately 15 acres be included as part of the severed lands to provide a future owner with the opportunity to expand aviation activities including hangars and associated movement areas.

Contractual obligations to address hangar property leases may add significant costs to the plan.

Article 6.15 of the hangar lease agreements states that if the township initiates termination of the leases, they are responsible for one of the following:

1. Purchase of the hangars at fair market value; or,

2. Purchase of the hangars at the depreciated capital cost (whichever of the two is lower); or,

3. In the event that agreement on fair market value cannot be reached, the cost or physically removing the structures shall be shared by both the tenant and the landlord.

The report said, “If the hangar owners wish to continue operating at the airport, it is possible the transfer of these leases can be incorporated into a sales agreement with a future owner.

If the hangar owner(s) wish not to continue operating at the airport, it is advisable to seek legal advice as to the Township’s contractual obligations.”

Staff recommended that the ORNGE air ambulance services continue to be available at the airport.

Once council has reviewed all offers and staff have negotiated the key terms and conditions of the disposition, a staff report will be brought forward to council seeking authorization to sign a purchase and sale agreement.

Staff recommended that the remaining agriculture and woodlot lands not be declared surplus to North Huron’s needs, and they were directed to present a report at a future meeting with additional information for council’s consideration.

Le RAMWC fait peau neuve pour son nouveau musée

Le Musée de l’aviation royale de l’Ouest canadien (Royal Aviation Museum of Western Canada RAMWC) a dévoilé une nouvelle image et un nouveau site Internet pour annoncer l’ouverture officielle de sa nouvelle installation prévue pour le début de 2022.

Le RAMWC est en construction sur le campus de l’aéroport international James Armstrong Richardson de Winnipeg. Conçu par l’agence de création winnipegoise Relish, le nouveau logo du musée s’inspire de Canadiana et de l’innovation aéronautique pour communiquer sa raison d’être. Le site Internet remanié se veut un portail spécialement pensé en fonction du prochain volet du musée.

« Nous anticipons avec enthousiasme le jour où nous pourrons ouvrir nos portes aux Manitobains. Nous croyons qu’ils seront étonnés et fiers de ce qu’ils y trouveront », a déclaré Terry Slobodian, président et chef de la direction du RAMWC par voie de communiqué. « En attendant, une visite sur notre site Internet remodelé les mettra en appétit sur ce qui s’en vient. »

Les visiteurs sont invités à visiter le Royalaviationmuseum.com pour avoir un aperçu de la nouvelle allure du musée.

RAMWC gets a new look for its new museum

Royal Aviation Museum of Western Canada (RAMWC) has unveiled new branding and a new website to herald the grand opening of its new facility slated for early 2022. RAMWC is being built on the Winnipeg James Armstrong Richardson International Airport campus.

Designed by Winnipeg creative agency, Relish, the museum’s new logo draws inspiration from Canadiana and aircraft innovation to communicate its raison d’être. The redesigned website is a portal for what is yet to come in the museum’s next chapter.

“We are excited for the day when we can open our doors to Manitobans. We believe that they will be amazed and proud at what they find,” said Terry Slobodian, President and CEO, RAMWC in a statement. “In the meantime, a visit to our redesigned website will whet their appetite for what is to come.”

Visitors are encouraged to check out Royalaviationmuseum.com for a sneak peek at the museum’s new look.

Prolongement de piste à l’aéroport de Waterloo, financement pour évaluation

Le 22 mars, l’Agence d’évaluation d’impact du Canada (IAAC) a annoncé un financement pour aider le public et les groupes autochtones à participer au processus d’évaluation d’impact du projet de piste de l’aéroport de Waterloo (YKF) situé à Breslau en Ontario.

Une aide financière est mise à la disposition des personnes et des groupes admissibles afin de les aider à participer à l’étape préparatoire d’évaluation d’impact. Au cours de la période de consultation publique actuelle – qui se terminera le 18 avril 2021 – les membres du public et les groupes autochtones sont invités à examiner le résumé de la description initiale du projet et à formuler des commentaires. L’Agence remboursera rétroactivement les participants admissibles pour leur participation à cette première période de consultation publique.

Les demandes reçues d’ici le 21 avril 2021 seront prises en compte.

Situé à Breslau en Ontario, l’aéroport international de la région de Waterloo propose de prolonger la piste 14-32 – pour la porter de sa longueur actuelle de 1250 m (4100 pi) à une longueur finale de 2134 m (7000 pieds) – de construire de nouvelles routes d’accès et une voie de circulation parallèle, de modifier le balisage lumineux d’approche de la piste et d’agrandir ou de déplacer le bâtiment de l’aérogare. L’IAAC explique que ces travaux amélioreront l’utilisation globale de l’aéroport en effectuant une mise à niveau de la piste, qui est actuellement capable de desservir des aéronefs du groupe AGN IIIA, de manière à ce qu’elle puisse accueillir des aéronefs du groupe AGN IIIB.

Résumant ses plans de prolongement de piste, YKF explique qu’à l’heure actuelle, la piste 14-32 peut accueillir des aéronefs légers de l’aviation générale et des activités de formation au pilotage, tandis que la piste 08-26 peut accueillir des aéronefs plus gros à fuselage étroit (comme le Boeing 737). Les avions à fuselage large (comme le Boeing 767 à deux allées) ne peuvent pas utiliser l’aéroport pour le moment, explique Waterloo International, et il n’y a pas d’option secondaire pour les avions à fuselage étroit, ce qui empêche les gros aéronefs d’utiliser YKF dans de mauvaises conditions météorologiques, impliquant de la pluie, du verglas ou des vents violents.

Le prolongement de la piste 14-32 à une longueur de 2134 m améliorera la sécurité et la fiabilité de l’aéroport, explique Waterloo International. Lorsque la piste 08-26 sera exposée à de forts vents latéraux combinés à des conditions de pluie ou de verglas, les gros aéronefs à fuselage étroit pourraient atterrir sur la piste 14-32. De plus, le service aérien courant pourrait utiliser la piste 14-32 lorsque la piste 08-26 est fermée pour réparation.

Le projet de prolongement de piste comprend les éléments suivants :
• Prolonger la piste 14 de 555 m (1820 pi), au nord-ouest en direction de Breslau.
• Prolonger la piste 32 de 329 m (1080 pi), au sud-est en direction de Cambridge.
• Prolonger la piste 26 de 529 m (1737 pi), vers l’ouest en direction de Guelph.
• Construire des voies de circulation parallèles aux nouveaux tronçons de piste.
• Construire des routes d’accès autour des nouveaux tronçons de piste.
• Déplacer le balisage d’approche de la piste 26.
• Installer un nouveau balisage d’approche pour la piste 14.
• Déplacer ou mettre à niveau d’autres aides visuelles.
• Déplacer ou aménager un tunnel pour le chemin Shantz Station.
• Revoir les circuits des avions autour de l’aéroport.

(Photo : Waterloo International Airport)

Waterloo Airport Runway Project, Assessment Funding Available

The Impact Assessment Agency of Canada on March 22 announced funding to help the public and Indigenous groups participate in the impact assessment process for the proposed Waterloo Airport Runway Project, located in Breslau, Ontario.

Funding is available for eligible individuals and groups to assist their participation during the impact assessment’s planning phase. During the current comment period, which ends April 18, 2021, the public and Indigenous groups are invited to review the summary of the initial project description and provide comments. The Impact Assessment Agency of Canada (IAAC) will retroactively reimburse eligible participants for their participation in this first comment period.

Applications received by April 21, 2021, will be considered.

Located in located in Breslau, Ont., the Region of Waterloo International Airport (WAI) is proposing to extend runway 14-32 from the current length of 1,250 metres to a final length of 2,134 metres, construct new access roads and a parallel taxiway, modify the runway approach lighting, and expand or relocate the terminal building. IAAC explains this work would improve the overall use of the airport by upgrading the runway, which is currently capable of serving aircraft of Aircraft Group Number IIIA, so that it would become capable of serving aircraft of Aircraft Group Number IIIB.

In outlining its runway expansion plans, Waterloo International explains, currently, Runway 14-32 can accommodate light general aviation aircraft and flight training activity, while Runway 08-26 can accommodate larger narrow-body aircraft (i.e. Boeing 737). Wide-body aircraft (i.e. Boeing 767 aircraft with two aisles) cannot use the airport at this time, explains Waterloo International, and there is no secondary option for narrow-body aircraft, which restricts larger aircraft from operating in poor weather conditions, such as rain, ice or high winds.

Extending Runway 14-32 to a length of 2,134 metres (7,000 feet) will improve the safety and reliability of the airport, explains Waterloo International: When Runway 08-26 has strong cross-winds combined with wet or icy conditions, larger narrow-body aircraft would be able to land on Runway 14-32. Additionally, scheduled air service could use Runway 14-32 when Runway 08-26 is closed for repairs.

The runway extension project design generally includes the following:

• Extend Runway 14 by 555 metres (1,820 feet) (northwest towards Breslau);
• Extend Runway 32 by 329 metres (1,080 feet) (southeast towards Cambridge);
• Extend Runway 26 by 529 metres (1,737 feet) (west towards Guelph);
• Construct taxiways parallel to the runway extensions;
• Construct access roads around the runway extensions;
• Move Runway 26 approach lighting;
• Install new approach lighting for Runway 14;
• Move or upgrade other visual aids;
• Move or tunnel Shantz Station Road; and,
• Upgrade how aircraft manuever around airport.

La saison de l’aérocamping est sur le point de commencer

Envoyé par Jean-Pierre Bonin

Dans l’édition d’août 2020 de COPA Flight, j’ai annoncé la création d’une base de données pour répertorier les “aéroports-sympathiques-au-camping-sous-l’aile”. J’ai aussi utilisé le terme Aérocaping pour simplifier. Ce répertoire s’est lentement développé et contient maintenant 45 aéroports dans 9 provinces. Le nombre d’aéroports par région canadienne est le suivant: Côte Ouest, 3; Prairies 9; Ontario-Québec 28; Atlantique, 5.

Un grand merci aux pilotes qui m’ont contacté pour obtenir le nouveau lien vers le répertoire ou pour suggérer des aéroports à ajouter.

En ce qui concerne l’ajout d’un aéroport, j’apprécierais grandement que vous m’informiez du nom du propriétaire ou du gestionnaire avec une adresse courriel afin que je puisse envoyer les documents appropriés à remplir. Ainsi, les pilotes auront accès à une meilleure information.

Les sujets du répertoire sont principalement orientés vers le camping/tourisme. Il est de la responsabilité du pilote d’obtenir les informations complètes relatives à l’aviation avant de planifier un vol. De plus, en règle générale, il est préférable de contacter l’aéroport pour se renseigner sur les conditions de camping et sur les restrictions COVID mises à jour en 2021.

Voici le lien vers le répertoire d’aérocamping

Vous pouvez également voir où sont tous les aéroports canadiens, inclus dans le répertoire, sur une carte ici

Pour en savoir un peu plus sur moi

Aerocamping season is just around the corner

Story and photo by Jean-Pierre Bonin

In the August 2020 edition of COPA Flight, I announced the creation of a database to highlight under-the-wing-camping-friendly-airports. I use the term Aerocamping to simplify things. This directory has been slowly growing and now lists 45 airports in nine provinces. The count of airports by Canadian region are as follows: West Coast 3; Prairies 9; Ontario-Quebec 28; and Atlantic 5.

Many thanks to pilots reaching out to me to either get the new link to the directory or to suggest airports to be added.

In terms of adding your Aerocamping airport, I would greatly appreciate you letting me know the name of the owner or the manager with an email address so I can send them the appropriate documents to fill out, with the ultimate goal of providing better information will be accessible to pilots.

Topics in the directory are mainly camping/tourism oriented, so please be sure to get the complete aviation related info before planning a flight. Also, as a general rule, it is best to contact the airport to inquire about the camping conditions and to have updated COVID restrictions in 2021.

View the Aerocamping directory.

You can also see where all the Canadian airports, listed in the directory, are Aerocamping map.

Please visit my page for contact information.

ASR teste le système de récupération par parachute pour l’eFlyer 2

Le 8 mars, Bye Aerospace – le développeur des avions tout électriques eFlyer – a annoncé qu’Aviation Safety Resources avait terminé avec succès le premier test de développement de son système de récupération par parachute pour avion entier destiné au eFlyer 2.

Rappelons que les aéronefs tout électriques de la série eFlyer de Bye Aerospace sont certifiés FAA Part 23. Larry Williams, président et chef de la direction d’ASR, a déclaré que les premiers essais avaient été achevés dans une installation de tests de chute à l’extérieur d’Henderson au Nevada à la fin de février 2021. « Cet essai était le premier d’une série de tests visant à qualifier le système de parachute de l’eFlyer 2 selon les normes de l’ASTM, et à s’assurer que la toile résisterait à la charge imposée », a-t-il fait valoir.

Conformément aux exigences de l’ASTM pour les tests de charge limite, des barils ont été remplis d’eau au poids de l’eFlyer 2. Il s’agissait du premier essai de développement d’une série de tests au cours desquels la charge a été larguée d’un hélicoptère à 6600 pieds d’altitude à la vitesse maximale où le système peut être déployé.

Photo: Aviation Safety Resources

« Tout était parfait », s’est exclamé M. Williams. « Jusqu’à présent, nous obtenons les résultats escomptés. La prochaine série d’essais sera constituée de tests de charge ultime où la chute s’effectuera à 1,15 fois le poids et la vitesse maximums du eFlyer 2. Ces tests représentent un environnement réel pour s’assurer que le système offre une sécurité maximale et pour démontrer la résistance de la toile. En dépassant les poids et vitesses nominaux, cela fournit un facteur de sécurité critique de 1,5X conformément aux exigences de l’ASTM et de la FAA. » La vidéo du test de chute peut être visionnée ici.

M. Williams a souligné que l’équipe d’ASR collecte une grande quantité de données lors des tests de chute, lesquelles sont ensuite utilisées pour analyser les calculs de détermination des charges afin de vérifier que les points de fixation résisteront à la charge en déploiement réel. « Nous sommes impatients de travailler avec la FAA sur les futurs tests de certification », a-t-il indiqué. « Du point de vue du travail d’équipe, la coordination avec Bye Aerospace a été formidable, et nous progressons comme prévu. »

George Bye, PDG de Bye Aerospace, a précisé que la sécurité des occupants continue d’être la priorité absolue dans la conception de la famille d’avions tout électriques eFlyer. « Le système de parachute pour avion entier conçu par ASR pour l’eFlyer 2 est exclusif à cet avion », a-t-il précisé.

En mars, Bye Aerospace a signé un accord ajoutant quatre eFlyers à son carnet de commandes : maintenant 721 unités d’eFlyer 2, d’eFlyer 4 à quatre places et des avions tout électriques à huit places bientôt annoncés.

(Photo : Bye Aerospace)

ASR tests eFlyer 2 Parachute Recovery System

Bye Aerospace, developer of the eFlyer series of FAA Part 23-certified all-electric aircraft, announced on March 8 that Aviation Safety Resources Inc., successfully completed the first developmental test of its whole-aircraft parachute recovery system for eFlyer 2.

Larry Williams, ASR President and CEO, said initial testing was completed at a drop range test facility outside Henderson, Nev., in late February 2021. “This test was the first in a series of tests to qualify the eFlyer 2 parachute system to ASTM standards and make sure the canopy will withstand the load put on it,” he said.

In accordance with ASTM requirements for limit load testing, barrels were filled with water to represent the weight of eFlyer 2. This was the first development test in a series of tests that were dropped from a helicopter at 6,600 feet and accelerated to the maximum speed at which the system will be deployed.

Photo: Aviation Safety Resources

“Everything was perfect,” Williams said. “So far we are getting the results we expected. The next series will advance to ultimate load testing where we will drop 1.15 times the maximum weight and speed for eFlyer 2. This testing represents a real-world environment to make sure the system provides maximum safety and demonstrates the parachute canopy is robust. By exceeding the rated weights and speeds, this provides a critical 1.5X safety factor in accordance with the ASTM and FAA requirements.” Video of the drop test is available here.

Williams said the ASR team collects a large amount of data during the drops tests that are used to analyze the loads determination calculations to verify the attachment points will withstand the load of the actual deployment. “We look forward to working with the FAA on future certification testing,” he said. “From a teamwork perspective, the coordination with Bye Aerospace has been terrific, and we are progressing right on schedule.”

George Bye, CEO of Bye Aerospace, said occupant safety continues to be the highest priority in the design of the eFlyer family of all-electric airplanes. “The whole-aircraft parachute system being designed by ASR for eFlyer 2 is exclusive to the airplane,” he said.

Bye Aerospace in March signed an agreement adding four eFlyers to its production backlog, now 721 units of eFlyer 2, four-seat eFlyer 4 and soon to be announced 8-seat all-electric aircraft.

(Photo: Bye Aerospace)